(0) Item Hello, Guest
Buyers SaltDogg Municipal Stainless Steel Hopper Spreader - Hydraulic Motors
Buyers SaltDogg Municipal Stainless Steel Hopper Spreader - Hydraulic Motors

(1400505SSH) Buyers SaltDogg 5.0 Cu. Yd. Municipal Stainless Steel Hopper Spreader - Hydraulic Motors

Pricing not available online.
Part Number:1400505SSH

(1400505SSH) Buyers SaltDogg 5.0 Cu. Yd. Municipal Stainless Steel Hopper Spreader - Hydraulic Motors

Buyers Products SaltDogg 3.5-5 Cubic Yard Hydraulic Conveyor Chain Spreader gives contractors and municipalities a heavy duty, durable spreader that is ready for use with a truck's existing central hydraulic system. The 96 in., 108 in., or 120 in. hoppers are designed for dump bodies and flatbeds with a minimum 19,500 lb GVW (gross vehicle weight) chassis. It works with bulk salt, bulk sand, or a 50/50 salt/sand mix.

The hopper, which comes outfitted with a top screen and fully welded frame, is made from high quality 304 stainless steel for long lasting corrosion protection. It comes equipped with two hinged top screens with 1/4 in bars. The steel pintle chain conveyor features a stainless steel inverted V to reduce stress on the drive line and improve flow. The high-flow conveyor is 14-1/2 in. wide with 1/4 in. crossbars, and has a stainless steel floor. An adjustable feedgate with lock pin offers additional material flow control.

The conveyor chain is driven by a hydraulic motor with a 20:1 worm gear box. The spinner is powered by a direct mount hydraulic motor. An 18 in. poly spinner casts material 2 ft. to 30 ft. The spreader is available with a regular or extended chute. Two adjustable baffles allow you to cater the spread pattern to your use. The chute and spinner assembly flips up or detaches completely, tool-free, for convenient bulk unload, easy servicing, and access to towing.

Hydraulic spreader controls are sold separately. A variety of options are available, including manual hydraulic, manual with load sensing, and electric over hydraulic, available with or without GPS.

Note: Shown with #3037145 spreader stand, sold separately.

  • General:
    • Self contained hopper.
    • Spreads free flowing materials sand and/or salt.
    • Spread width of 4' to 30'.
  • Material Hopper:
    • 12 gauge 304 stainless steel with continuously welded seams.
    • All hopper sides are formed with a continuous "J" channel profile for added rigidity and strength. Six (6) 12 gauge body gussets.
    • Optimum material feed is maintained by hopper side walls slopped at 45 degrees.
    • Heavy-duty, 4 section hinged top grate is standard. Bars are 1/4" diameter located on 3" center grid (installed).
    • Built-in for corner lift points.
  • Conveyor:
    • Conveyor is 14-1/2" wide O.D. x 12-1/2" wide on center, all steel pintle chain type, (#667H Pitch) with 1/4" x 1" crossbars on 4-5/8" centers, 12,500 PSI/Strand.
    • Replaceable 10 gauge stainless steel chain shields.
    • Replaceable 10 gauge stainless steel conveyor floor.
    • 10 gauge stainless steel inverted V (installed).
    • Conveyor driven by 20:1 ratio worm gearbox utilizing tapered bearings.
    • Conveyor chain is adjustable for chain take up, providing optimum performance and drive life.
    • Chain drive and idler sprockets are 6-tooth cast sprockets keyed to 1-1/4" shafts.
    • Conveyor chain wiper minimizes waste.
  • Spinner Assembly:
    • Spinner chute has two adjustable internal baffles.
    • Four (4) external baffles (3 adjustable, 1 fixed).
    • 18" x 3/4" thick polyurethane spinner disc.
    • Hydraulic model's chute utilizes (4) spring loaded stainless steel quick detach pins for ease of: material unloading, tow hitch access, and storage.
    • Bolt-on spinner housing minimizes replacement cost.
  • Power Source:
    • Hydraulic Drive: Two independent hydraulic motors (15 GPM @ 1,500 PSI).
  • Optional Equipment:
    • Nylon strap mounting kit.
    • Tailgate latch kit.
    • Liquid spray systems, electric.
    • Stainless steel D.O.T. spreader lightbar.
  • Dimensions:
    • 5 cu. yd. - Overall length, 141.8"; width, 70"; height, 57.5"
  • Recommended Use:
    • Dump bodies and flat beds with a minimum GVW chassis of 19,500 lbs.

Note: Freight shipping NOT included in price and will be billed separately after purchase.

Related Items

Recently Viewed Items