(0) Item Hello, Guest
Buyers SaltDogg Municipal Stainless Steel Hopper Spreader - Electric Motor
Buyers SaltDogg Municipal Stainless Steel Hopper Spreader - Electric Motor

(1400505SSE) Buyers SaltDogg 5.0 Cu. Yd. Municipal Stainless Steel Hopper Spreader - Electric Motors

CALL FOR PRICING
Pricing not available online.
Part Number:1400505SSE

(1400505SSE) Buyers SaltDogg 5.0 Cu. Yd. Municipal Stainless Steel Hopper Spreader - Electric Motors

Buyers Products SaltDogg 3.5-5 Cubic Yard Electric Conveyor Chain Spreader gives contractors and municipalities a heavy duty electric spreader ready for commercial use. The 96 in., 108 in., or 120 in. hoppers are designed for dump bodies and flatbeds with a minimum 17,500 or 15,000 lb GVW (gross vehicle weight) chassis (depending on model chosen). It works with bulk salt, bulk sand, or a 50/50 salt/sand mix.

The spreader strikes a balance between the convenience and value of an electric spreader and the robust volume traditionally found in gas and hydraulic models. Its hopper and fully welded frame are made from high quality 304 stainless steel for long lasting corrosion protection. The hopper comes outfitted with a top screen to help break up clumps of material during loading.

The spreader is equipped with a steel pintle chain conveyor that features a stainless steel inverted V to reduce stress on the drive line and improve flow. The high-flow conveyor is 14-1/2 in. wide with 1/4 in. crossbars and a stainless steel floor. An adjustable feedgate with lock pin offers additional material flow control.

The spinner is powered by a 1/2 HP, 12V motor, and the conveyor chain is powered by a 3/4 HP, 12V motor. The spreader's 18 in. poly spinner casts material 2 ft to 30 ft. The spreader is available with a regular or extended chute. Two adjustable baffles allow you to cater the spread pattern to your use. The chute and spinner assembly flips up or detaches completely, tool-free, for convenient bulk unload, easy servicing, and access to towing. The spreader is controlled by a heavy duty in-cab controller with independent variable speeds for the conveyor and spinner. It also comes outfitted with four hinged-top screens with 1/4 in. bars.

  • General:
    • Self contained hopper.
    • Spreads free flowing materials sand and/or salt.
    • Spread width of 4' to 30'.
  • Material Hopper:
    • 12 gauge 304 stainless steel with continuously welded seams.
    • All hopper sides are formed with a continuous "J" channel profile for added rigidity and strength. Six (6) 12 gauge body gussets.
    • Optimum material feed is maintained by hopper side walls slopped at 45 degrees.
    • Heavy-duty, 4 section hinged top grate is standard. Bars are 1/4" diameter located on 3" center grid (installed).
    • Built-in for corner lift points.
  • Conveyor:
    • Conveyor is 14-1/2" wide O.D. x 12-1/2" wide on center, all steel pintle chain type, (#667H Pitch) with 1/4" x 1" crossbars on 4-5/8" centers, 12,500 PSI/Strand.
    • Replaceable 10 gauge stainless steel chain shields.
    • Replaceable 10 gauge stainless steel conveyor floor.
    • 10 gauge stainless steel inverted V (installed).
    • Conveyor driven by 20:1 ratio worm gearbox utilizing tapered bearings.
    • Conveyor chain is adjustable for chain take up, providing optimum performance and drive life.
    • Chain drive and idler sprockets are 6-tooth cast sprockets keyed to 1-1/4" shafts.
    • Conveyor chain wiper minimizes waste.
  • Spinner Assembly:
    • Spinner chute has two adjustable internal baffles.
    • Four (4) external baffles (3 adjustable, 1 fixed).
    • 18" x 3/4" thick polyurethane spinner disc.
    • Chute utilizes (4) spring loaded stainless steel quick detach pins for ease of: material unloading, tow hitch access, and storage.
    • Bolt-on spinner housing minimizes replacement cost.
  • Power Source:
    • Electric Drive: Two independent electric motors (spinner and auger).
  • Optional Equipment:
    • Nylon strap mounting kit.
    • Tailgate latch kit.
    • Liquid spray systems, electric.
    • Stainless steel D.O.T. spreader lightbar.
  • Dimensions:
    • 5 cu. yd. - Overall length, 141.8"; width, 70"; height, 57.5"
  • Recommended Use:
    • Dump bodies and flat beds with a minimum GVW chassis of 19,500 lbs.

Note: Freight shipping NOT included in price and will be billed separately after purchase.

Related Items

Recently Viewed Items