(1400250SS) Buyers SaltDogg 72" Gas Stainless Steel Hopper Spreader Kit - Extended Chute
Kits include Spreader, Inverted "V", and Top Screen
All hopper spreaders are completely self-contained, ultra durable spreader units designed for ice and snow control. The rugged design allows for use with salt, sand and other materials. The complete assembly mounts easily on pickup, dump and platform trucks making it ideal for municipalities, shopping malls, industries, hospitals and private contractors.
Capacity: 1.3 cu. yds.
Dimensions: 89" x 47" x 32.5"
Weight: 764 lbs.
Feed Mechanism: Conveyor
Engine: 10.5 HP Briggs & Stratton
Spinner: 11.5" poly
Spread Width: 2-30 feet
Control: In-Cab Console
Vehicle Applications: 3/4 and 1-ton trucks
STAINLESS STEEL MATERIAL HOPPER – Electrically welded high-quality grade 304 stainless steel ends and sides sloped at 45° are constructed with channel formed top edges. Vertical supports add extra strength to the unit. The single lift point on the cross support beam is located at the unit ’s center of gravity to allow for easy loading and unloading. The floor is constructed of high-quality grade 304 stainless steel.
CONVEYOR – The conveyor is made of 12" wide all-steel pintle chain with 3/16" x 3/4" cross bars. Chain strength is 11,000 lbs. per strand; 22,000 lbs. total weight. The drive sprockets are 6-tooth cast iron, on a 1-1/8" diameter shaft. The conveyor chain has an adjustment range of 3-1/2". The drive shaft has heavy-duty, sealed, self-aligning ball bearings with grease fittings. The idler drum has heavy-duty 1" diameter ball bearings.
CONVEYOR GEAR CASE – Gear is constructed of aluminum bronze, worm gear is hardened steel and ground. Housing is made of durable cast iron. Gear ratio is 20:1 with 1" input shaft and 1-1/8" output shaft on tapered roller bearings
FEEDGATE – Lever operated with a friction lock for accurate adjustment.
SPINNER CHUTE ASSEMBLY – A polymer disc with four fins is connected to a 3/4" diameter shaft secured on two pillow block bearings. The spreading material is guided from the conveyor to the spinner plate through an enclosed high-quality grade 304 stainless steel chute with internal and external deflectors. Adjustable deflectors allow for complete directional spread control and full or compact spread. Total spread radius ranges from 2' to 30'. The extra wide rear deflector protects the rear and under carriage of the vehicle.
ENGINE – Heavy-duty 10.5 horsepower Briggs & Stratton Intek industrial/commercial gasoline engine. Engine comes equipped with alternator and 12 volt electric starter with in-cab start/stop and electric throttle control (standard). Entire engine is completely protected by the convenient hinged hood.
ELECTRIC THROTTLE CONTROL – Throttle control unit allows for full-range of throttle settings, including idle and full choke, via the in-cab hopper control box. Use of electric throttle control eliminates cable freezing, binding and breaking. Battery included.
CLUTCH – 12 volt DC electric clutch has a three-position in-cab switch, for greater control and material economy. Also allows for low-speed operation and spot spreading.
Note: Freight shipping NOT included in price and will be billed seperately after purchase.